The DeHavilland Twin Otter Vistaliner panel

Version 1

By Dave Haskell 29/03/02
E-mail:- dave@haskell.demon.co.uk

Instructions:

1) Unzip to a temp folder then drag and drop the panel folder to Barry Blaisdell's DHC6SBA1 aircraft folder, overwriting the panel folder. Drag and drop all the gauges within the gauge folder into the main FS2K2 gauges folder.

Special thanks to:-
Barry Blaisdell for the use of his Twin Otter gauges
HGHB for their excellent gauges
Dai Griffiths for the dfd*.gau

The pilots of N288SA for allowing me permission to take the photgraphs of the cockpit after a fabulous flight over the British Virgin Islands. If you're ever in St Thomas, take the flight, it is wonderful, and the landings the one of the smoothest I've had on water.


Operating Instructions

To operate the overhead panel click on switch 1 in the bottom left hand corner of the main panel, near the three large switches.
To display the Yokes click on Switch 3, which is situated above switch 1.

IMPORTANT MODS REQUIRED TO USE THIS PANEL WITH OTHER TWIN OTTERS.

To use this panel with other Twin Otters you must replace the
[Radios Section] ..Copy and paste the following over the
Original [Radios Section] in the aircraft.cfg of other
Twin Otter Aircraft.

[Radios]
// Radio Type=availiable, standby frequency, has glide slope
Audio.1=1
Com.1=1, 1
Com.2=1, 1
Nav.1=1, 1, 1
Nav.2=1, 1, 0
Adf.1=1
Transponder.1=1
Marker.1=1

Disclaimer :

The files & data contained in the file 'DHC6SBpn' are for private
entertainment purposes only. I will not be held responsible for any
damage or loss of data incurred directly or indirectly from the use of
these files. The 'DHC6SBpn.zip' file may be copied, distributed,
transmitted, uploaded or download only as long as it's content remains
unchanged. The individual files contained within 'DHC6SBpn.zip' may not
be distributed, transmitted, uploaded or downloaded. The 'DHC6SBpn.zip'
file may be included with other files that have been packaged for
distribution. Again, only if the content of 'DHC6SBpn.zip' remains
unchanged. No funds or services may be received in exchange for these
files. This is freeware. Gauges are copyrighted by their various designers and must only be use with their express permission.

If you have any problem with any part of this disclaimer then you should
not attempt to use these files. By copying the content of 'DHC6SBpn.zip'
to your flight simulator program's directories, you are in essence
agreeing to the terms of this disclaimer.

Happy Flying

Dave Haskell (c)2002